1. To ensure safety and prevent fires, do not splash liquid water into the wires and plugs, as well as the cover plate of the refrigeration fan. Also, try to keep the desktop of the equipment dry and clean.
2. When using a magnetic polishing machine, do not invest funds in the processing of magnetic product workpieces. When necessary, please contact the manufacturer and do not place electronic valuable items on the machine desktop.
3. The damaged parts of this equipment show night leakage of the magnetic polishing machine. Immediately disconnect the power and terminate the operation, and inform the relevant after-sales personnel.
4. When the surface of the machine heats up, pay attention to checking whether the cooling fan is working properly and strictly prohibit high-temperature use.
5. Please turn off the power and disconnect the main power when not using this device.
6. The power supply needs to be retrofitted with an overcurrent switch, and it is proposed to use a current of less than 6A.
7. Do not work at low frequencies for a long time, as lightning may cause damage to the machine.
Magnetic polishing machines are applied in many fields, so what are the characteristics of magnetic polishing machines and force polishing machines.
Speaking of magnetic polishing machines, perhaps everyone should not be unfamiliar with it. This is because polishing has become the most basic operation around everyone now. Regardless of what product or factory it is, polishing is often important and also the most basic job. Previously, if you wanted to polish, it was relatively difficult because polishing is a process, and magnetic polishing machines are not something that can be completed by anyone or just one technology.
Polishing not only emphasizes the high technical requirements, but also the high demands for the entire environment. Therefore, if we want to achieve a very good polishing effect, there are many tasks that should be done. For example, everyone should first have a skilled polishing master, which is a crucial factor for the success of all polishing work. Many factories lack such a master themselves, so polishing work has never been able to break through.