The traditional automatic polishing machine can keep the parts in the correct arrangement and move in the correct direction on the production line. The deburring machine usually also adopts the vibrating disc method, and the working method is slightly different. Now let me introduce the working principle of the automatic polishing machine to everyone.
If you want to know the working principle of the automatic polishing machine, please first consider the purpose of the application: orienting and moving parts along the production line or packaging line or polishing and deburring parts. The automatic polishing machine in the production line uses electromagnets to generate mechanical vibrations. They are located on top of a set of electromagnets and springs, which are designed to generate and control vibrations. The automatic polishing machine uses the asymmetry of the part (for example, the screw at one end is heavier than the screw at the other end) combined with vibration to make the part jump up and down quickly, so its resilience is sufficient to align in the correct direction in the channel. The channel then guides the part (usually upward) in a spiral path to the machine that orients the part in the correct direction. Then, the part moves down toward the exit point on the assembly line or packaging line.
The working principle of the deburring automatic polishing machine is the same, but slightly different. The bowl is still on top of a set of springs, but when it vibrates, it creates a mixing bowl effect. The machining shop uses these small automatic polishing machines to deburr parts. When the machine and the deburring medium are put into the bowl together, the vibration of the machine will generate friction between the medium and the parts, thereby eliminating burrs and polishing and finishing the parts. Some machines also introduce water and special liquids into the mixture to help complete the process.
When the automatic polishing machine has been running for a long enough time, the user turns it off, and then the parts and polishing medium can be released into the bucket or bucket equipped with a sieve through the chute at the bottom to capture the parts. The user can also remove the parts by hand and look around in the medium in the bowl to find them, but in order to take all the parts out of the bowl, the chute is a convenient downhill slide that can pour all the items in the bowl. out.
Therefore, when you study the working principle of an automatic polishing machine, determine whether you want to align the parts and send them to the production or packaging line, or whether you want to polish and deburr the parts. This will guide you in the right direction to obtain a suitable automatic polishing machine model.