Polishing machine manufacturers tell us that at present, with the rapid development of all walks of life, polishing machine equipment is needed in more and more fields. Polishing machines also play a very important role and occupy a very significant dominant position. So, what are the main features of the polishing machine? Today, the small editor of the polishing machine manufacturer will give you a detailed introduction:
The important layout includes: main motor drive mechanism, belt pulley system for mobilizing the rotating body to rotate, disc reverse rotating body for planetary transmission, roller, sprocket system for mobilizing the roller to rotate, sprocket reducer control system for controlling roller rotation and unloading, quiet insurance system, etc.
Important principle: install four hexagonal rollers at equal intervals on the circumference of the rotating body. On the one hand, the rollers revolve with the rotation of the rotating body. On the other hand, under the action of the sprocket system, the polishing machine rollers rotate around their own axis (the rotation direction is opposite).
Polishing machine features
The outstanding features of the polishing machine are as follows:
1. use the principle of planetary rotation and centrifugal activity to grind and polish parts and polishing abrasives during revolution and rotation;
2. practical batch of small and medium-sized parts, especially practical workpieces with special-shaped cavity holes and heat treatment penalties, improving work efficiency by 10 ~ 20 times;
3. the hexagonal barrel is lined with rubber or polyurethane (PU) and driven by synchronous belt, which makes the operation stable and low noise;
4. the built-in four hexagonal barrels are arranged in degrees, and the polyurethane inner barrel can be replaced. The barrel rolling group can be replaced without affecting the working time of the host;
5. the volume of objects in each drum (workpiece, grinding stone, water, etc.) does not exceed 45% ~ 55% of the drum volume;
6. the ratio of workpiece to grinding stone is usually 1:1 ~ 1:5, and 1:10 for fine grinding of polishing machine. The detailed workpiece shall be determined after test;
7. in principle, the time of one-time standard work is about 1 hour. If it is necessary to inherit the work, it should be based on that the heat-resistant boundary temperature of the drum lining rubber layer does not exceed 80 ℃, and the work can be carried out after changing the water and abrasive every about 1 hour.
It is precisely because the polishing machine equipment has these advantages and characteristics that it will be widely used in many fields and be valued by people.