News

What Are The Polishing Processes Discussed

Aug 21, 2024 Leave a message

In fact, the polishing process is simply the actual processing technology of using polishing equipment and polishing materials to finely process the surface of the product. After polishing, it has high smoothness and brightness.

Nowadays, polishing technology is divided into:

(Drum polishing machine, centrifugal polishing machine, magnetic polishing machine, vibration polishing machine) Mechanical polishing, electrolytic polishing

Detailed introduction and basic principles of mechanical polishing (drum polishing machine, centrifugal polishing machine, magnetic polishing machine, vibration polishing machine):

When mass producing bearing steel balls, the method of barrel polishing is often used. When rough throwing, a lot of steel balls, grinding fluid, and wear-resistant materials are placed in a container. After the machine equipment is started, the steel balls and wear-resistant materials are randomly flipped and collided inside the cylinder to achieve the goal of removing surface protrusions and reducing surface roughness,

Approximately 0.01 millimeters of machining allowance can be removed. When polishing, place steel balls, wear-resistant materials, and gloss agents in the wooden barrel, and grind again for the corresponding duration to obtain a dazzling and shiny surface.

The polishing of precision line rulers is carried out by soaking the production and processing surface in a polishing solution, which is a mixture of chromium oxide micro powder with a particle size distribution of W5-W0.5 and emulsion.

The polishing wheel is made of wood or specially made fine felt that has undergone degreasing treatment. Its trajectory is a uniform and dense mesh. After polishing, the surface roughness should not exceed Ra0.01 microns, and there should be no surface depressions observed under a 40x magnification microscope.

Mechanical polishing needs to be carried out in a dedicated polishing machine, relying on the relative grinding and extrusion effects between polishing materials such as sandpaper and the pressing surface to reduce wear marks. It is divided into rough polishing and fine polishing.

The production and processing of surface modification of materials using flexible polishing tools and wear-resistant material particles or other polishing media. Polishing cannot improve the machining accuracy or geometric accuracy of workpieces, but mainly aims to obtain a smooth surface or mirror luster. Adding the corresponding polishing solution may quickly restore the metal surface beyond its original luster, without leaving any scars.

Send Inquiry